Installing And Removing; Safety First; Installing (Jcb Robot 150, 160, 165, 170, 185, 190 1105, 1110, 1Cx) - JCB XR Serie Manual Del Usuario

6

Safety First

! ! CAUTION
Hydraulic Pressure
Hydraulic fluid at system pressure can injure you.
Before disconnecting or connecting hydraulic hoses,
stop the engine and operate the controls to release
pressure trapped in the hoses. Make sure the engine
cannot be started while the hoses are open.
INT-3-1-11/1
! ! CAUTION
Take care when lifting/handling.
SPECIFICATION for the attachment weight.
B-2-1-2/2
Installing (JCB Robot 150, 160, 165, 170,
185, 190, 1105, 1110, 1CX)
To engage an attachment on the Quickhitch, do the
following:
! ! WARNING
If two people are doing this job, make sure that the
person working the controls is a competent operator. If
the wrong control lever is moved, or if the controls are
moved violently, the other person could be killed or
injured.
2-2-6-5
1 Align the machine square to the attachment.
2 Lower the loader arm fully to bring the hitch plate A
below the level of the lips on the attachment. Make
sure the hitch locking mechanism is unlocked as
detailed in the machine operators manual.
Note: The illustration below is typical and does not refer to
a specific machine.
Y
All manuals and user guides at all-guides.com

INSTALLING AND REMOVING

Refer to
A
Y
X
A1461-1
3 Drive the machine slowly forward. Stop when the hitch
plate A just touches the attachment.
4 Raise the loader arm and engage the hitch plate A in
the lips on the attachment. Stop the movement as
soon as the plate is engaged.
5 Fully roll back the attachment.
6 Disable the hydraulic function of the machine, turn off
the engine and apply the park brake as detailed in the
machine operators manual.
7 Lock the attachment onto the hitch as detailed in the
machine operators manual.
8 The attachment is now locked onto the Quickhitch.
9 Connect the attachment tail hoses to the appropriate
auxiliary circuit pipework, (check machine Operator
Manual for correct procedure).
10 Return to the machine make sure all persons are clear
of the machine and attachment, start up the machine
as detailed in the operators manual.
6
0876