Tabla de contenido
Second Generation XM (2011-2015) / Kia Sorento XM 2011-2015 Service Manual / Brake System
Kia Sorento: Brake System - Parking Brake System - Parking Brake Pedal Assembly Installation
Install the holding clip (A, B) after fixing the parking brake cable.
1.
Install the parking brake pedal, and then install the parking brake pedal mounting bolts (A) and nut (B).
2.
Adjust the parking brake pedal stroke by turning the adjusting nut (A).
(1) Operate the parking brake pedal through a full stroke over 3 times for setting the parking cables.
Adjust the adjusting nut (A) for parking brake pedal stroke 8 ~ 9 notches when operating effort is 294N(30kgf, 66lb).
1. The parking brake adjustment must be carried out after adjusting the rear shoe.
2. After adjusting parking brake, notice following matter.
1) Must be free from clearance between adjusting nut and pin.
2) Check securely that the brake is not dragging.
3.
(2)
4. Reconnect the parking brake switch connector.
Install the juncting box.
5.
(Refer to Body Electrical System - "Relay Box(Passenger Compartment"))
Install the crash pad lower panel. (Refer to Body - "Crash
6.
pad lower panel")
www.bestservicemanual.com
Tabla de contenido
Solución de problemas
