Team kalorik TKG AS 1003 Manual Del Usuario página 7

Ocultar thumbs Ver también para TKG AS 1003:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 16
CLEANING
The switch has to be in OFF position and the appliance has to be unplugged from the
power supply before it can be cleaned.
Wipe the inside and outside of the appliance with a paper towel or a soft cloth. It
should not be washed in a dishwasher (the carriage tilts to make the cleaning easier).
Do not clean the inside or outside with any abrasive scouring pad or steel wool as this
will damage the finish.
Do not immerse in water or any other liquid.
Dry all parts well before storage.
REMOVING THE BLADE (Fig. 4)
To clean the appliance thoroughly, it is possible to remove the blade.
Put the switch on the off-position, unplug the appliance and turn the locking device
(3) located in the middle of the blade.
Make sure you replace the blade in its exact original position after cleaning. Screw the
locking device back on.
When the blade is detached, make sure that no water penetrates into the appliance!
Caution! Handle the blade with care, otherwise you might get injured as it is very sharp.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2012/19/EU
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
the rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance
with the directive.
ERP DECLARATION – REGULATION 1275/2008/EC
We, TKG Sprl/Bvba, hereby confirm that our product meets the requirements of regulation
1275/2008/EC. Admittedly, our product does not dispose of a function to minimize the
power consumption, which should according to regulation 1275/2008/EC put the product
in off or standby mode after finishing the main function, but this is practically impossible, as
it would compromise the main function of the product so strongly, that using the product
would no longer be possible!
The user manual is by simple request also available in electronic format from the after-sales
service (see warranty card).
7
on
TKG AS 1003
Tabla de contenido
loading

Tabla de contenido