VALBERG 15S39 D S701T Instrucciones De Uso página 16

B
To remove the worktop from the dishwasher, remove the screws holding the worktop in place
at the back of the dishwasher. Then push the panel 1 cm towards the back and lift it up.
Adjust the legs of the dishwasher according to the slope of the floor and the level.
your dishwasher by pushing it underneath the worktop, ensure that it the pipes are not bent
or crushed.
Height
Warning:
Once the worktop has been removed, the dishwasher must be placed in
an enclosed space of the dimensions shown (see fig. 4).
Using the appliance
H
4
Without isolation
All products
820 mm
3
Product
For the 2
nd
830 mm
9 EN
With isolation
rack For the 3
835 mm
3
Install
rack
rd