VALBERG 15S39 D S701T Instrucciones De Uso página 13

B
Using the appliance
Water inlet hose
Never use the water inlet hose from your old dishwasher. Use the new
hose supplied with your dishwasher. Before connecting the new or
water inlet hose, or one that has not been used for a long time, to your
dishwasher, run water through it for a while. Connect the water inlet
hose directly to the water inlet tap by hand. The pressure at the valve
must be minimum 0.03 Mpa and maximum 1 Mpa. If the water pressure
is higher than 1 MPa, install a pressure reducing device between the
tap and the hose.
Once the connections are made, open the valve completely and check that there are no leaks.
For the safety of your dishwasher, always close the inlet tap after each programme.
Check the marking on the water inlet hose!
If the models are marked with 25°, the water temperature may be at the maximum. 25°C
(cold water)
For all other models:
Preferably cold water; hot water max. temperature 60°C.
N.B.: Some models use an Aquastop system. If your dishwasher
is equipped with this system, there is a dangerous voltage.
Never cut the Aquastop nozzle and make sure that it is not
bent or twisted.
6 EN