Personal Safety - Holmatro HTS 550 A Manual

Always adhere to these regulations and to the locally prevailing safety regulations, and proceed very
carefully.
Inform all people involved in the activities of the operation about these safety regulations.
2.2 Model plate and CE marking on the equipment
Refer to Fig. 1.
All pictograms attached to the equipment pertaining to safety and danger must be complied with and
remain clearly legible.
WARNING
Not following these instructions can result in serious personal injury, fatal accident, damage
to the system or consequential loss.
/i
Type of mark Position
Model A
Instruction B
2.3

Personal safety

Wear all personal means of protection as prescribed in the standard work procedure. Negligent use of
personal means of protection can result in serious injury. During use of the tool wear at least the
following personal means of protection:
• Helmet;
• Safety goggles or full face shield;
• Safety gloves;
• Safety clothing for the entire body;
• Safety shoes with good ankle support and toe protection.
2.4 Safety regulations with respect to the equipment
• Never change the settings of the safety valves and change-over valves.
2.5 Safety regulations with respect to the operation of the system
• Make a risk assessment of the procedure before you start work (EN 14121).
• Keep bystanders at a distance and be extra careful in the vicinity of people and animals.
• Make sure the work area is clearly laid out and has good lighting.
• Avoid stress and work in a structured way. This reduces the risk of errors, combinations of dangers
and accidents.
• Before use, check the equipment for damage. Do not use the equipment if it is not in good
condition, and consult your Holmatro dealer.
• Stand on a stable base.
• During operation, never get between the object and the equipment.
• Monitor the situation of the equipment and the structure continually while using the equipment.
• Parts of an object that could fly off due to cutting or spreading must be secured.
• Never couple or uncouple hydraulic couplers while the system is under pressure.
• Use only genuine Holmatro accessories and ensure that they have been attached correctly.
• Never put your hands on the arms, blades or plunger of a tool.
HTS/HTW/FTW
Description
Manufacturer's information stating: name,
address, CE marking, model indication, serial
number and date of construction and maximum
operating pressure.
• Wear personal means of protection.
• Read the user manual before use.
916.000.901_000
EN
Part number
-
920.299.572
25