urmet domus 1092/601 Manual De Instrucciones página 39

Press the arrow buttons to switch from OUTDOOR to INDOOR.
Press CLOSE to go back to the previous menu.
Select END and press CLOSE to go back to the previous menu.
Subjects will appear dark and hardly visible if lit by a strong light from the back. The BLC function
avoids this problem and provides good compensation.
Select this menu item to select the required option: OFF, LOW, MIDDLE and HIGH.
This function is used to access the dome setting submenu.
Select this menu item and press OPEN to access the following submenu:
MODE
ZOOM TRK
ZOOM SPEED
D-ZOOM
DISP ZOOM MAG
ZOOM POS INIT
LENS INIT
END
Option
MODE
ZOOM TRK
ZOOM SPEED
D-ZOOM
DISP ZOOM MAG
ZOOM POS INIT
DS1092-041C
All manuals and user guides at all-guides.com
BACKLIGHT – BLC
FOCUS – ZOOM SETTINGS
FOCUS SETUP
Value
MANUAL - AUTO -
ONE-PUSH
ON - OFF
FAST - SLOW
ON - OFF
ON - OFF
max). With the
ON - OFF
MANUAL
ON
FAST
OFF
ON
ON
Explanation
This is used to select the camera focusing mode.
If ON is selected, the camera lens will track
focusing constantly.
This is used to select the camera focusing speed.
The function cannot be activated if the AUTO
MODE option is selected and ZOOM TRK is ON.
This enable/disables digital zoom. When enabled,
the zoom percentage can be adjusted (x2 min. –
x10 max.).
When the ON option is selected, the active zoom
setting appears on the monitor (x2 min. – x10
D-ZOOM
max can be reached.
FUNCTION NOT CURRENTLY AVAILABLE
function on, a zoom of x100
39