urmet domus 1092/601 Manual De Instrucciones página 32


Fasten the dome to the end of the union tube being careful not to turn the tube to prevent twisting and
damage (in order to do this, plug the wire into the dome terminal board, fasten the union tube to the
dome making it turn while holding the dome still).

Block the fitting tube to the dome using the two round head screws provided (screw 2).

Position the dome in the point chosen on the ceiling making the wire pass through the slot in the
circular bracket. (The slot is not needed if the dome is poisoned on a false ceiling: in the case, drill an
additional hole in the false ceiling at the dome outlet of suitable diameter to allow the passage of the
wire).

Fix it securely to the ceiling using the four holes in the bracket base. Use 4 M6 screws (not included).
The position of the hole in mm is shown below for convenience.
32
All manuals and user guides at all-guides.com
70
3
2
1
DS1092-041C