Technical Data - Excalibur EHVR12 Manual Del Usuario

THE VACUUM SEALER FEATURES
D. Stop Button (Stop)
Press the Stop button to stop any process.
E. Pulse Vacuum Button (Pulse)
Press Pulse, digital display shows P, press the Pulse button again and again to
vacuum the bag little by little. If no actions within 10 seconds, machine will go back
to Ready-to-Work mode.
F. Accessory Vacuum Button (Acc)
Only for vacuum canister, wine bottle stopper and other accessories; press "Acc" button,
the machine starts vacuum cycle. After the vacuum cycle, machine will
stop automatically WITHOUT seal.
G. Vacuum Level Button (Vacuum Degree )
Press this button to set the vacuum level needed. There are two options High or Low.
After setting, the indicator light is on accordingly. The default setting is High.
H. Digital Displayer
1. Displays the vacuum cycle, value will count up from 0 to 9. When it shows 9,
vacuum cycle is finished.
2. Displays the seal time, the seal time can be adjusted and set from 0-6s. There is back-
up memory function to the seal time.
3. When it displays "E", machine is in protective status.
I. Seal Time Adjusting Button ("+" "-")
Simply adjust the seal time "up" or "down" by using "+" or "-" buttons. When it is
adjusted to 0, machine will not seal .Set the seal time from 0-9 seconds. The
machine will memorize the last seal time setting.

TECHNICAL DATA

Voltage: 100-120V ~,60Hz
Pressure: -28.3"Hg /-958mbar (±3%)
Max bag width: 12.2" (310mm)
Weight: 6.3 lbs. (2.9Kg)
Power: 200W
4
Pump: dual
Seal wire width: 3mm
Size: 15.5" x 8.2" x 3.7"
(395 x 210 x 95mm) (L x W x H)