THE VACUUM SEALER FEATURES
H
A. On/Off Button (ON/OFF)
1. Connect power, press "ON/OFF" after 1 second, the machine enters into
Ready-to-Work mode. The digital display shows the sealing time. The indicator
light is on, fan works.
2. Under the Ready-to-Work mode, press "ON/OFF", machine enters into standby mode.
The digital display and indicator light are off, fan stops.
3. Under the Work mode, "ON/OFF" button is same as Stop button.
Under the Ready-to-Work mode, if no any action within 10 minutes, the digital display
and fan will close automatically, the machine enters into standby mode.
B. Auto Vacuum Button (Start)
1. Press Start button, the machine will vacuum, seal automatically. After finish working, the
machine will beep.
2. During Vacuum process, press Seal or Pulse button to change working mode. (*Under
the auto Vacuum/Seal process, if the machine lid doesn't press down well or the pump
temperature is over-heated, the display shows E, machine beep and then stop working.)
C. Seal Button (Seal)
1. Press "Seal" button to stop vacuum cycle and seal to prevent crushing delicate items.
2. Make custom-sized bags.
During the heating/sealing process, if the machine lid is not well pressed down or the
pump temperature is over-heated, or more than 25 individual seals within 5 minutes,
digital display shows E, machine stops working.
www.ExcaliburDIY.com
Professional Vacuum Sealer
I
A
E
F
B
C
G
D
3