Canister Guidelines; How To Use With Vacuum Bottle Stoppers - Excalibur EHVR12 Manual Del Usuario

CANISTER GUIDELINES

• Use only canisters designed for vacuum packaging. Other containers can implode under
the vacuum pressure of the Vacuum Sealer.
• Cool liquids in refrigerator before vacuum packaging. Hot foods should be cooled
before vacuum packaging.
• Do not freeze vacuum canister. Suggested lowest temperature is 64.4° (-18°C). Too low
lower than 64.4°(-18°C) or too high higher than 212° (100°C) temperature will make the
canister material endure lower pressure or melt.
• Hand wash canister lid. Do not put in dishwasher and micro-oven. The canister body
itself is dishwasher safe and micro-oven safe. Suggested highest temperature is 100° (100°C).
• If liquids are caught in the accessory hose, run warm water through hose.
Be sure hose is not attached to accessory port.
• Powdered or granulated foods should be covered with a paper towel
before vacuuming to prevent food from traveling into the vacuum mechanism.
• Vacuum packaging is not a substitute for canning. Perishable foods
still need to be refrigerated or frozen.

HOW TO USE WITH VACUUM BOTTLE STOPPERS

A Vacuum Sealer can vacuum bottle with bottle stoppers. If you cannot finish a bottle of
wine at one time, or you need to preserve a bottle of a non-carbonic acid drink, edible oil,
a bottle of juice or any liquid that is stored in a bottle, you can use the Vacuum sealer to
vacuum the bottle with a bottle stopper.
1. Plug the vacuum bottle stopper to the bottle. Please allow at least 1" between the
bottom of the stopper and the surface of the liquid.
2. Connect the hose to the accessory port of the machine and the other end to the port of
the bottle stopper.
3. Press the two ends of the machine lid with some strength, the lid is locked when you hear
a "da" sound.
4. Press "Vacuum & Seal" button, the machine will start to vacuum.
** Press "Cancel" button to stop the machine.
5. After the vacuum cycle is complete, the machine will stop automatically. Remove the
hose from the stopper.
6. Place the bottle vertically on a plane surface. Make sure the liquid does not touch the stopper.
7. Simply remove the stopper if you want to open the bottle.
8