Adjusting The Recline Angle Without The Base; Adjust Recline - Cybex Platinum ATON Q Manual Del Propietário

Ocultar thumbs Ver también para ATON Q:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

ADJUSTING THE RECLINE ANGLE WITHOUT THE BASE

It's very important for your child's safety that this child
restraint be installed at the correct angle.
DO NOT use this or any other child restraint with a
premature, low birth weight, or medically fragile infant,
until after you have consulted with your doctor. Some
infants may have difficulty breathing or have other
medical problems when placed in a seated position.
If the child restraint is too upright, the child's head
may fall forward and cause breathing problems. If the
child restraint is TOO RECLINED crash protection will
be reduced.
Failure to properly recline the child restraint on the
vehicle seat increases the risk of Death or serious
injury.

ADJUST RECLINE

Adjust the seat angle until the
Carrier is level with the ground.
If you are having trouble achieving the proper recline angle:
1. Uninstall Infant Carrier.
2. Place a tightly rolled towel or pool noodle under
the Infant Carrier, where indicated. If on an aircraft,
a tightly rolled airline blanket may be placed
under the Infant Carrier to adjust the angle.
3. Continue installation.
RED Level Line
on the Infant
FRONT OF VEHICLE
LINE MUST BE LEVEL WITH GROUND
WHEN INSTALLED WITHOUT BASE
FRONT OF VEHICLE
LINE MUST BE LEVEL WITH GROUND
WHEN INSTALLED WITHOUT BASE
42

Capítulos

Tabla de contenido
loading

Tabla de contenido