flir E Serie Manual Del Usuario página 13

3 EN-US English
2. Connect the USB battery charger to the USB connector at the top of the
camera.
3. Charge the battery for 2 hours before starting the camera for the first time.
4. Insert a memory card into the card slot at the top of the camera.
Note Empty or use a memory card that has not previously been used in an-
other type of camera. The cameras may organize files differently on the
memory card. There is therefore a risk of losing data if the same memory
card is used in different types of cameras.
5. Push the on/off button
6. Aim the camera toward the object of interest.
7. Adjust the infrared camera focus by rotating the focus ring.
Note It is very important to adjust the focus correctly. Incorrect focus ad-
justment affects how the image modes work. It also affects the temperature
measurement.
8. Pull the trigger to save an image.
9. When you have completed the inspection, connect the camera to a computer
using the USB cable.
10. Import the images into a FLIR Thermography software and create an inspec-
tion report.
3.7 View from the front
See Figure 2.1 View from the front, page 3.
1. Laser distance meter.
2. Infrared lens.
3. Focus ring.
4. Autofocus button.
5. Trigger.
6. Lamp for the digital camera (left and right sides).
7. Digital camera.
8. Attachment point for the hand strap bracket (left and right sides).
9. Tripod mount.
10. Attachment point for the hand strap, wrist strap, or lanyard strap (left and
right sides).
2. This item is dependent on the camera model.
#T810585; r. AA/73543/73543; mul
to turn on the camera.
2
2
10