Daitsu APD12-AN Manual De Usuario página 34

Model: R51I13/BG (C)E,
R51I15/BG (C)E
NOTE:
• R51I15/BG (C)E models have
no SWING feature.
Model: R51I17/BG (C)E
NOTE: While the unit is running under Energy-saving
mode, it would be cancelled if any other buttons
are pressed.

TIMER OFF Button:
Press this button to activate the Auto-off time setting.
Each press will increase the time setting in 30 minutes
increments, up to 10 hours, then at 1 hour increments up to
24 hours. To cancel the Auto-off time setting, just press the
button until the time setting is 0.0.
LOCK Button:
11
Press this recessed button to lock all current settings, and
the remote controller will not accept any operation except
that of the LOCK. Use the LOCK mode when you want to
prevent settings from being changed accidentally. Press
the LOCK button again to cancel the LOCK function. A lock
symbol will appear on the remote controller display when
the lock function is activated.
LED Display Button:
12
Press this button to clear the display on the indoor unit,
press it again to light the display.
FOLLOW ME Button:
13
• Press this button to initiate FOLLOW ME function.
• When the Follow Me function is activated, the remote
display is actual temperature at its location. The remote
control will send this signal to the air conditioner every 3
minutes interval until press the Follow Me button again.
• The Follow Me function is not available under DRY and
FAN mode.
• Switch the operation mode or turn off the unit will cancel
the follow me function automatically.
ION Button:
14
When push this button, the ion generator is energized and
will help to remove pollen and impurities from the air.
32