Function Buttons - Daitsu APD12-AN Manual De Usuario

Function buttons

Model: R51I14/BG (C)E,
R51I16/BG (C)E.
NOTE:
• R51I16/BG (C)E models have
no SWING feature.
31

TEMP UP button
Push this button to increase the indoor temperature
setting in 1°C (2 ºF) increments to 3ºC (88ºF).

TEMP BOTTOM Button:
Push this button to decrease the indoor temperature
setting in 1°C (2ºF) increments to 17ºC (62ºF).

MODE Button:
Each time the button is pressed, the operation mode is
selected in the sequence of the following:
NOTE: Heat mode is for Cooling & Heating models only.

SWING Button: (on some models)
Used to stop or start louver movement and set the desired
up/down airflow direction.

RESET Button:
Once the recessed RESET button is pressed, all of the
current settings will be cancelled and the controller will
return to the initial setting.

ON / OFF Button:
Operation starts when this button is pressed and stops
when the button is pressed again.

FAN SPEED Button:
Used to select the fan speed in four steps:
Auto
Low
Med

TIME ON Button:
Press this button to activate the Auto-on time setting.
Each press will increase the time setting in 30 minutes
increments, up to 10 hours, then at 1 hour increments up
to 24 hours. To cancel the Auto-on time setting, just press
the button until the time setting is 0.0.

ECONOMY (SLEEP) Button:
Select this function during the sleeping time. It can
maintain the most comfortable temperature and save
energy. This function is available on COOL, HEAT or
AUTO mode only .
High