Orbea BLUE PAPER TERRA OMR 2022 Manual Tecnico página 17

32 | O R BEA
ST E M
OC CYCLE COMPUTER MOUNT
USE INSTRUCTIONS
1. Always use the correct adaptor for your computer
brand. If you device is not Sigma, Garmin or Wahoo,
check with the manufacturer what bracket standard
it uses.
Using the incorrect bracket might damage the com-
puter and cause it to fall from the mount during
your ride.
You can install the adaptor in 2 positions (further or closer to the handlebar) depending on the computer size.
T ECHNI CAL M ANUAL
When installing the adaptor on the mount, the
name of the brand should be readable from
the handlebar.
B LUE PAP ER T ERR A · O M R 2 0 22
The Wahoo adaptor makes the lower camera/light
turn 90º from its original position. To use it with a
GoPro standard light or camera, it is necessary to
use a 90º GoPro adaptor.
2. Orbea, as all computer manufacturers, recom-
mends to use the tether included with the compu-
ter around the handlebar to avoid damage to the
computer or its loss in case or a fall or an accident.
The OC R2 computer mount is only compa-
tible with ICR01 stem with the R2 faceplate.
To use it on ICR01 R1 stem, it is necessary to
replace the R1 faceplate for the R2 faceplate.
O RB EA | 3 3
R2 MOUNT ANGLE ADJUSTMENT
The OC Road R2 computer mount allows for some angle
adjustment for an optimal computer visibility.
Loosen the mount fixing bolt to the faceplate, adjust the
mount angle and tighten again the fixing bolt.
FACEPLATE ICR01 R1 FACEPLATE ICR01 R2
FACEPLATE ICR01 R1 FACEPLATE ICR01 R2
3 3
E N