Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Before you call for service...
Troubleshooting Tips
Save time and money! Review the charts on the following pages first
and you may not need to call for service.
Problem
Refrigerator does not operate
Vibration or rattling (slight vibra-
tion is normal)
Motor operates for long periods or
cycle on and off frequently. (Mod-
ern refrigerators with more stor-
age space and a larger freezer re-
quire more operating time. They
start and stop often to maintain
even temperatures).
Refrigerator or freezer compart-
ment too warm
Frost or ice crystals on frozen
food (frost within package is nor-
mal)
Divider between refrigerator and
freezer compartments feels warm
Automatic icemaker does not
work
44
All manuals and user guides at all-guides.com
Possible Causes
Refrigerator in defrost cycle.
Either or both controls set to 0 (off).
Refrigerator is unplugged.
The fuse is blown/circuit breaker is
tripped.
The refrigerator is in showroom mode.
Rollers need adjusting.
Normal when refrigerator is first plugged
in.
Often occurs when large amounts of
food are placed in refrigerator.
Door left open.
Hot weather or frequent door openings.
Temperature controls set at the coldest
setting.
Temperature control not set cold
enough.
Warm weather or frequent door open-
ings.
Door left open.
Door left open.
Too frequent or too long door openings.
Automatic energy saver system circu-
lates warm liquid around front edge of
freezer compartment.
Icemaker power switch is in the off posi-
tion.
Water supply turned off or not con-
nected.
Freezer compartment too warm.
Piled up cubes in the storage bin cause
the icemaker to shut off.
Ice cubes stuck in icemaker. (Green
power light on icemaker blinking).
What To Do
• Wait about 30 minutes for defrost cycle to end.
• Set the controls to a temperature setting.
• Push the plug completely into the outlet.
• Replace fuse or reset the breaker.
• Unplug the refrigerator and plug it back in.
• See Rollers.
• Wait 24 hours for the refrigerator to completely cool
down.
• This is normal.
• Check to see if package is holding door open.
• This is normal.
• See About the controls.
• See About the controls.
• Set the temperature control one step colder. See About
the controls.
• Check to see if package is holding door open.
• Check to see if package is holding door open.
• This helps prevent condensation on the outside.
• Set the power switch to the on position.
• See Installing the water line.
• Wait 24 hours for the refrigerator to completely cool
down.
• Level cubes by hand.
• Turn off the icemaker, remove cubes and turn the ice-
maker back on.
Capítulos
Tabla de contenido
