About the crispers and pans.
Not all features are on all models.
About crisper removal.
Not all features are on all models.
All manuals and user guides at all-guides.com
Fruit and Vegetable Crispers
Excess water that may accumulate in the bottom of
the drawers should be wiped dry.
On some models the bottom drawer has a cover
that slides back as the drawer is opened. This al-
lows full access to the drawer. As the drawer is
closed, the cover will slide forward into its original
position.
Adjustable Humidity Crispers
Slide the control all the way to the
to provide high humidity recommended for most
vegetables.
Crisper Removal
The top crispers can easily be removed by pulling
the drawer straight out and lifting the drawer up
and over the stop location.
If the door prevents you from taking out the draw-
ers, first try to remove the door bins. If this does
not offer enough clearance, the refrigerator will
need to be rolled forward until the door opens
enough to slide the drawers out. In some cases,
when you roll the refrigerator out, you will need to
move the refrigerator to the left or right as you roll it
out.
To remove the bottom crisper:
1. Pull the drawer out to the stop position.
2. Rotate all four swing locks to the unlock position.
3. Lift the front of the drawer up and out.
(high) setting
Slide the control all the way to the
to provide lower humidity levels recommended for
most fruits.
To replace the bottom crisper:
1. Make sure all four swing locks are in the unlock
position.
2. Place the sides of the drawer into the drawer
supports, making sure the swing locks fit on the
drawer slots.
3. Lock all four swing locks by rotating them to the
lock position.
(low) setting
33