Home Decorators Collection 52154 Guía De Uso Y Cuidado página 12

Assembly - Attaching the Lights
1
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
□
Connect the wires from the light kit fitter assembly (F) to the
wires from the bottom of motor assembly (E) by connecting
the molded adaptor plugs together. Carefully tuck all wires and
splices into the switch cup.
□
Place the light kit fitter assembly (F) into the motor assembly (E),
aligning the raised dimples on the top flange of the light kit fitter
assembly (F) with the flat areas on the switch box on the bottom
of motor assembly (E).
□
Turn the light kit fiiter assembly (F) clockwise until it stops.
Assembly - Attaching the Accessories
Mounting the remote control holder
NOTE: Screw wall anchors are included for extra support. The
included screws are designed to screw easily into the wall. If
you would like a more permanent or secure hold, install the wall
anchors prior to attaching the wall cradle to the wall.
□
Slide the screw cover plate up to remove it from the wall
cradle.
□
Position the wall cradle in the desired position and attach it to
the wall using the included wall cradle screws.
□
Slide the screw cover plate back onto the wall cradle to
conceal the screws.
Screw cover plate
12
E
F