CO
- pressure regulator regular
2
The pressure regulator regular has been especially designed for use with either marine or fresh
water aquaria. To ensure maximum service life, dependable performance and trouble-free
operation, read and follow all instructions.
1. Technical data
Type:
Code-No.:
Flow rate:
Max. pressure:
Gas:
Material:
Working pressure:
Pressure gauges:
Adjustment of CO² flow:
Fig. 1:
1.
Working pressure gauge
2.
Storage pressure gauge
3.
Needle valve
4.
CO
hose fitting
2
5.
Nut for hose
6.
O-ring, washer
7.
Mounting nut (for bottle)
8.
O-Ring
Available spare parts: Please refer to
www.aqua-medic.de.
2. In general
The pressure in CO
2
to
be
handled
safely
pressure regulation. Solenoid valves, used for
aquariums, are safe for a pressure up to a
maximum of 10 bars. Standard tubing may
be used up to 1 bar, special CO
6 bars. The pressure in a CO
depending
on
the
between 60 and 70 bar. In order to reduce
this pressure down to the optimum working
pressure of the Aqua Medic CO
pressure
regulator
pressure regulator regular is best suited for
this purpose. It is a rugged instrument,
engineered to withstand regular use while
providing sufficient delicate regulation. The
pressure regulator regular is a complete top
class instrument. The whole unit is chrome-
Installation
plated to improve the corrosion- resistance.
regular
71011
70 – 1,200 ml/min.
120 bar
CO
only, working pressure 70 bar
2
brass, chrome-plated
1.5 bar (at 70 bar primary pressure), firmly adjusted
2 pieces, plastic-coated for working pressure and storage pressure
needle valve
bottles is much too high
without
a
proper
tubes up to
2
bottle varies,
2
room
temperature,
system, a
2
is
needed.
The
3
4
CO
2
The
unit
pressure gauges. The primary pressure gauge
shows the CO
This pressure is 60 - 70 bar as long as there is
liquid CO
2
pressure
gauge
working pressure of 1.5 bar (between 1 and 2
bar).
1
7
6
5
is
fitted
with
2
pressure inside of the bottle.
2
left in the bottle. The second
shows
the
8
2
chrome-plated
fixly
adjusted
3