Ats Configuration Menu - Kohler 14/20RESA Funcionamiento

3.16 ATS Configuration Menu

Note: The ATS Configuration menu appears only if a
Model RXT transfer switch is connected.
Use the ATS Configuration submenu to check the Model
RXT transfer switch system settings and time delays,
and change the settings, if necessary.
Changing ATS Configuration Settings
To enable editing, press the select button. The value
flashes to indicate that it can be changed. Press the up
and down arrow buttons to change the value. Press the
Select button to save the value shown.
Use the up and down arrow buttons to move to the next
value to be changed. Repeat the adjustment process
until all values are correct.
Press the down arrow until Return is displayed. Press
the select button to return to the main menu.
TP-6804 1/15
ATS ---->
Configuration
Note: Actual settings may vary.
Figure 3-17 ATS Configuration Menu
Section 3 RDC2 Controller Operation
Normal Freq:
60 Hz
Normal Voltage:
240 V
Emerg. Freq:
60 Hz
Emerg. Voltage:
240 V
Emergency Start:
3 sec
Xfer frm Normal
3 sec
Xfer from Emerg:
120 sec
<---- Return
tp6810
45