Milwaukee TQSE 1200Q Manual Del Usuario página 6

E
Adjusting Torque Setting
These screwdrivers have a torque setting
adjustment collar for driving different types
of screws into different materials. When
properly adjusted, the clutch will slip at a
preset torque to prevent damage to the
screw or tool.
The TQSE 1200Q Screwdriver has a torque
setting adjustment collar that may be ad-
justed to one of forty-four settings. The
torque is adjustable from 1 to 15 newton-
meter.
The TQSE 2500Q Screwdriver has a torque
setting adjustment collar that may be ad-
justed to one of thirty-three settings. Be-
yond setting thirty-three, the tool will stall
before slipping the clutch. The torque is
adjustable from 1 to 12 newton-meter.
To select a setting, turn the adjustment
collar in the direction indicated on the tool.
Note: Use a piece of scrap material to test
the different settings before driving
screws into workpiece. To determine a spe-
cific setting for your application, use a
torque wrench to check the correct torque
at any particular setting.
English
Operation
WARNING!
To reduce the risk of injury, ALWAYS
wear safety goggles or glasses with
side shields.
Using Forward/Reverse Switch
15 - Forward
F
16 - Reverse
1. For forward (clockwise) (15) rotation.
2. For reverse (counterclockwise) (16)
rotation. Although an interlock prevents
reversing the tool while the motor is
running, allow the motor to stop com-
pletely before reversing.
Starting, Stopping and Controlling
Speed
1. To start the tool, pull the trigger.
2. To stop the tool, release the trigger.
3. To vary the driving speed, simply in-
crease or decrease pressure on the
trigger. The further the trigger is pulled,
the greater the speed.
Using the Lock Button
1. To lock the trigger, push the lock button
in while pulling the trigger. Release the
trigger.
2. To unlock the trigger, pull the trigger and
release.
4