Troubleshooting - wissner-bosserhoff SafeLift Manual De Instrucciones

15. Troubleshooting

Errors/faults
1. Bed does not perform
any movements / ac-
tions
2. Bed does not perform
any movements / ac-
tions
possible cause
GO button not activated
Receiver locked
Controller not programmed
SafeLift Box not connected cor-
rectly
Controller or SafeLift box defective Contact WiBo service
Handset not correctly plugged in
or defective
Another controller in range is pro-
grammed in the SafeLift Box
Solution
Press GO button
Unlock receiver
Program the controller according
to chapter 4.7
Check plug connection
Check the plug connection, oth-
erwise call WiBo service
Carry out the deletion procedure
as described in chapter 4.7 and
re-learn the required controller.
49