wissner-bosserhoff SafeLift Manual De Instrucciones página 38

Hook the upper retaining straps of the plate into
the slider and push it back into its initial position.
Close the fastening clip.
Remove the handset from the middle socket on
the motor. First guide the SafeLift cable over the
cross brace to which the motor is attached.
Then plug it into the slot of the handset.
Insert the handset into the SafeLift box and
thread it into the cleat.
Replace the motor cover.
Then reconnect the mains plug to the mains
socket. If no transmitter has been programmed,
the LED on the box lights up in red.
38