Vaude Power Lizard Ultralight Manual Del Usuario página 9

All manuals and user guides at all-guides.com
Congratulations on choosing a VAUDE Power Lizard tent.
This absolutely ultralight double wall tent was specifically
designed for nature enthusiasts who place a high value on
a minimal tent weight and pack size.
- and this in VAUDE's renowned premium quality.
Note: VAUDE tents are known for their extremely simple
set up. If any step in the set up process seems difficult, do
not use force. Instead, take the time to find out what the
problem is.
Assembly Instructions
Please follow these instructions:
1. Remove any sharp objects from the ground where the
tent will be set up.
2. Lay out the tent on the ground and connect the tent
pole sections. (2 pins and one long pole)
3. Thread one end of the pole into the metal grommet (A)
on the outer tent and the other end into the opposite
grommet.
4. Clip the power frame hooks (B) onto the poles,
beginning with the middle clip. Leave the clips in the open
position for now.
5. Insert the pins from the outside into the head and foot
end of the tent, threading through the loop (C). Each pin is
attached between its pocket and a metal grommet.
6. Tension out the tent with three stakes at each end of
the tent.
7. Open the entrance and tension the power frame by
tightening the tent tensioner (D).
8. Stake out the middle pole (and tension out the guy lines
as needed.)
9. Secure the clips to the poles by closing the red clips.
GB
7