Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Take down
1. Take out the stakes and pole pins, and push the poles
out of their sleeves - don't pull them out!
2. Disconnect the poles and roll them up with the tent. (Do
not stuff the poles into the packsack after you have put the
tent in!)
Technical details
Fly: Both side silicone coated 20D Polyamide Ripstop
fabric with a 3.000mm hydrostatic head.
Inner tent: 15D Polyester fine mesh.
Floor: Laminated Ripstop Polyamide fabric 240T with a
10.000mm hydrostatic head.
Poles: AL 7001 T6, Featherlite 7,5mm.
20D siliconised:
Siliconised fabric features tear resistance that is 6-12
times higher than conventional PU coated fabric, with 3-4
times higher UV resistance levels. Three to four-fold
siliconisation on both sides of the fabric creates a very high
spray value (permanent water beading ability)
40D Laminated Floor:
In order to reach a consistently high waterproof value of
10.000mm, a lamination process is used for this fabric.
Lamination is more resistant against formic acid from ants
than normal PU coating.
Processing and Quality
Seams: Up to date it was not possible to tape the seams of
siliconized material to make them 100% waterproof. The
Power Lizard Ultralight is one of the first tents worldwide
made from siliconized tent material with standart taped
seams. This is a VAUDE only technology and makes the
seams 100% waterproof as compared to other siliconized
tents.
GB
8
