Installation; Connection To Electrical Power Supply; Refrigerant - Bertazzoni WC 5B 2T Serie Manual Del Usuario

2. INSTALLATION

2.1 Installation
Make sure that installation is performed correctly,
adhering to all directions in the specific installation
manual provided with the appliance.
2.2 Connection to the electrical power
supply
The appliance is equipped with a Schuko type 16A
plug and must be connected to the electrical power
supply through a corresponding Schuko socket.
Do not use extension cords and/or multiple adapters
for the power supply connection.
Important
Do not use extension cords and/or
multiple adapters for the power supply
connection.
Warning
If energy is
alternative energy power source (solar,
geothermal, etc..) or if home automation
systems are installed, it is necessary
to install the Alternative Energy Kit to
integrate the unit into the power grid.

2.3 Refrigerant

The refrigerant isobutane (R600a) is contained
within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
> During transportation and installation of the
appliance, be certain that none of the components
of the refrigerant circuit become damaged.
> If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition;
6
supplied through an
– thoroughly ventilate the room in which the
appliance is situated.
ISO 7010 W021
Caution:
risk of fire / flammable materials.
Important
Carry out transportation, installation
and/or clearing with extra care so that
no damage occours to the refrigeration
circuit.