Urmet Sinthesi Steel 1083/64 Manual Del Usuario página 29

column
interface
ID = n
2Voice
power supply
BUTTON CONFIGURATION FOR SPECIAL FUNCTION
It is possible to confi gure a button for a special function, for example to turn the stairs lights on.
To confi gure the button, perform as follows:
• Go to advanced confi guration.
• Keep the selected button pressed for 3 seconds, the door unit emits an acoustic signal to confi rm that
the acquisition has been successfully performed.
PROGRAMMING DATA DELETING
To delete all the data programmed in the advanced confi guration, follow the instructions below:
• Go to advanced confi guration.
• Keep any button pressed for 5 seconds at least. The door unit emits a fi rst acoustic signal after 3 seconds
and another one longer after 2 seconds, to confi rm the deleting.
DS1083-058B
"B"
Secondary call module with 8 buttons
ID = n AUX dip 2 = 1
offset = 11
Called users: from 11 to 18
Secondary call module with 11 buttons
ID = n AUX dip 2 = 0
offset = 0
Called users: from 0 to 10
"A"
29