Urmet Sinthesi Steel 1083/64 Manual Del Usuario página 27

• Access advanced confi guration.
• Set the ID dip-switch to 0.
• Press the upper button of the door unit (fi rst
button).
• Set the ID dip-switch to 1.
• Press third button of the fi rst button module
(fi fth button) to associate user 0 of column 1
in this manner.
• Set the ID dip-switch to 2.
• Press fi rst button of the third button module
(eleventh button) to associate user 0 of
column 2 in this manner.
• Reset the ID dip-switch in start position.
• Quit advanced confi guration mode.
DS1083-058B
The fi nal confi guration will be:
Column Column
0 start 1 start
4 USERS 6 USERS
P1÷P4
The confi guration of column 0 is not required
if the default settings of the door unit are
maintained because all buttons are assigned
to this column.
Repeat the operation on all the main door units.
Column
2 start
8 USERS
P5÷P8 P9÷P12
1083/17 (1)
P13÷P16
OUTPUT
27