Velleman CU2200 Manual Del Usuario página 10

Ocultar thumbs Ver también para CU2200:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Operating Voltage Low Level Alarm Message
When the power supply voltage level is below the minimum level at 5.34VDC, the CU2200 will send
an alarm SMS message.
Operating Voltage Low Level Alarm
This command is used to set the action to be taken once the operating voltage drops below 7.0VDC.
Value of the current operating voltage can be retrieved by command 2.
Command: PWD:XXXX,ADCOUT0:YY,ZZZZBBBB,NNN%
XXXX
YY
ZZZZBBBB
NNN
Arm/Disarm Setup
Command: PWD:XXXX,ARM%
Example:
PWD:1234,ARM%
Command: PWD:XXXX,DISARM%
Example:
PWD:1234,DISARM%
System Information Report
c.
Default Setting
Command: PWD:1234,PARAMETER1%
ST:000;T:2006/10/01/01:01;H:1;F1:,00;F2;,00;XH:31#
Command: PWD:1234,PARAMETER2%
ST:000;VL:7.00,O:00,0000,000;A1M:5.000,0.000,1.000,0,5.000,0.500,O:00,00000000,000;A2M:
5.000,0.000,1.000,0,5.000,0.000,O:00,00000000,000#
Command: PWD:1234,PARAMETER3%
ST:000;K1:1,O:00,00000000,000;K2:1,O:00,00000000,000;K3:1,O:00,00000000,000;K4:1,O:00,
00000000,000;K5:1,O:00,00000000,000;K6:1,O:00,00000000,000;K7:1,O:00,00000000,000;K8:
1,O:00,00000000,000#
Command: PWD:1234,PARAMETER4%
ST:000;C1:,1;C2:,1;C3:,1;C4:,1;C5:,1;C6:,1;C7:,1;C8:,1;#
System Parameters RESET
Command: PWD:XXXX,PARAMETER&%
[SMS message received]
Parameter initialize success!
20.06.2011
CU2200
Date
2007-06-15
Time
13:25
ST:001;TM200706121325;V:5.34#
Password
00 means alarm not reported to control centre
10 means alarm reported to control centre 1
01 means alarm reported to control centre 2
11 means alarm reported to control centre 1 and 2
Selection of the alarm phone dial and alarm SMS
0 means no alarm report
1 means SMS only
2 means phone dial only => (Phone dial not available)
3 means SMS first, then phone dial =>(Phone dial not available)
Z Z
Z Z
st
nd
rd
th
1
2
3
4
phone number
B B B B
th
th
th
th
5
6
7
8
phone number
Relay output control
0 means no relay output control
1 means relay output triggered by alarm
N N N
st
nd
rd
1
2
3
relay output
nd
rd
(2
and 3
relay output not available)
XXXX
Password
Password
Unit is armed and in alert status
XXXX
Password
Password
Unit is disarmed and no alarm is reported
1234
1234
10
v3-01
©Velleman nv
Tabla de contenido
loading

Tabla de contenido