Particular Caution - Risk Of Injury For Children; Risks From Wear; Important Information Prior To Mounting; Mounting The Product - Crivit Pro 287910 Manual De Instrucciones

Particular caution – Risk of
injury for children!
• Do not allow children to use the product without
supervision. Instruct them regarding the correct
use of the product and supervise them.
Only allow use if the mental and physical
development of the children allows it.
This product is not suitable for use as a toy.

Risks from wear

• The product may only be used in perfect
condition. Inspect the product for damage or
wear before each use. The safety of the product
can only be guaranteed if it is inspected re-
gularly for damage and wear. Discontinue use
if damage is found.
• Only use original replacement parts.
• Protect the product from extreme temperatures,
sun, and moisture. Incorrect storage or use of
the product can lead to premature wear and this
can result in injury.
• The self-locking effect on parts that are suscep-
tible to wear, e.g. the nuts on the screws, can
decline after being assembled several times.
Replace these parts with original replacement
parts where necessary.
Important information prior to
mounting
You must observe the following before mounting
the product on the wall or ceiling.
Attention! The product is only suitable for solid
concrete walls. Only use suitable 10mm bolt an-
chors or long dowels for corresponding construc-
tion materials and ceilings or for load-bearing
masonry.
Seek advice from an expert prior to assembly.
Suitable mounting location
A solid concrete wall or ceiling or a full brick wall
are suitable locations for mounting.
Note: Other kinds of mounting structure must be
checked by an expert for loading capacity and
stability.
Attention! It is not permitted to mount
the product in perforated bricks, hollow
blocks, aerated concrete, plasterboard,
gypsum fibreboard, or wood.
18 GB/IE
All manuals and user guides at all-guides.com
Suitable mounting material
The wall or ceiling material must be determined
before mounting the product.
Corresponding assembly materials must be
selected for mounting if the mounting location is
able to carry the load.
The wall mounting must withstand a tensile load of
200kg (2000 N) on each screw.
Mounting materials:
• Long dowels Ø 10/120 for concrete and load-
bearing masonry
• Bolt anchors M10x120 for concrete (plus one
washer and one nut per bolt anchor)
Note: Ask a specialist retailer and choose the
correct size and thickness of the corresponding
material for your own safety.
Suitable height
When you mount the product on the ceiling the
height is given. Mount the product on the wall at
a height that you can still reach from the floor but
so that you can still execute the exercises without
touching the floor.
Note: The product must be mounted on the wall
horizontally. Otherwise there is a risk of muscle
tension caused by an uneven load on arm muscles
and the shoulder area.

Mounting the product

You can mount the product on a wall or on the
ceiling. Mount the pull-up bar (1) on the mounts
(2) depending on where the product is to be
attached.
Note: Two people are needed in order to mount
the product.
You will need a suitable pen and a spirit level in
order to mark the drill holes. You will need a drill
with the correct drill bits in order to drill the holes.
Note: Select the correct drill depending on the
characteristics of the wall.
In order to mount the product you will need a
suitable screwdriver or a ratchet spanner with the
standard attachment. The tools are not included in
the scope of delivery.