Cleaning And Maintenance; Troubleshooting - cecotec CONGA POPSTAR 2000 WET&DRY Manual De Instrucciones

3. CLEANING AND MAINTENANCE

Clean the product and its accessories frequently with a dry cloth.
Accessories can be cleaned with some water and non-abrasive cleaning agent.
Make sure the device and the accessories are completely dry before using them again.
Use a cleaning brush to clean the suction base if necessary.
Do not immerse the vacuum cleaner in any liquids.
Do not clean the vacuum cleaner with chemical products.
Keep the vacuum cleaner unplugged and store it in a fresh and dry place.
Fig. 20.
Cleaning the dust tank
After cleaning or if a decrease in suction power is noticed, unplug the device from the power
supply and empty the dust tank. To do so:
First, open the safety lock system and lift the top cover.
Fig. 18.
Empty the tank.
Fig. 19.
It is important to clean the dust tank periodically in order to avoid bad smells and damage to
the product.
Make sure the tank is completely dry before using it again.

4. TROUBLESHOOTING

Problem
Motor doesn't
work
Suction decrease
Hose comes off
easily
Check part
Power plug
Hose
Dust tank
Hose connection
Solution
If it is not plugged in, plug it in.
If it is blocked, clean it; If the tube
doesn't connect well, connect it properly.
If it is full of water, empty it.
Plug the hose into position firmly.
POPSTAR 2000 WET&DRY
ENGLISH
27