Securing The Generator - Dometic TEC 29EV Instrucciones De Montaje

TEC29EV
9.2

Securing the generator

Note on installation location
 Make sure that no combustible objects are stored or installed near the air
outlet or the ventilation slots. A distance of at least 50 cm should be kept.
 For a correct ventilation keep a distance of at least 30 cm from the
generator's air outlet.
 For safety reasons, note the location of existing wiring harnesses, wires
and other components within the installation area, in particular those
which are not visible, when installing the generator (when drilling or
screwing etc.).
You can secure the generator with the holders supplied in two ways:
 External installation (fig. 2, page 3):
External installation has the following benefits: lower space requirement,
fast installation, easy access for maintenance work.
– To ensure the generator is attached securely, use the retaining
bracket (fig. 2 1, page 3) supplied.
– If the air intake opening of the generator is located behind a vehicle
wheel, you need to prevent the wheel from splashing any water into
the generator interior when it rains (e.g. by using a splash guard).
 Internal installation (fig. 3, page 4):
For internal installation, you need to prepare a sealed compartment
against the vehicle interior which can also be insulated against sound.
– Attach exhaust and air intake openings to the floor and in front of the
generator cover. The air intake openings must have cross-section of
at least 240 cm
– You must also fit a seal (AG 128) made of fire-retardant rubber with a
thickness of at least 5 mm between the floor of the vehicle and the
generator.
 Leave a space of at least 20 mm between the generator hood and sur-
rounding parts so that sufficient space remains for cooling air to pass
through.
EN
All manuals and user guides at all-guides.com
2
.
Installation
21