Error Codes Shown On The Control Unit; Led Colour Indications; Spare Parts - VMI URBAN Manual De Instalación Y Mantenimiento

6.1.1 Error codes shown on the control unit

Error codes
E0
E1
E3
E4
E5
E6
E9

6.1.2 LED colour indications

The VMI® URBAN appliance and the control unit have an indicator that changes colour according to
the operational status. If the colour changes from BLUE or flashes, refer to the table below:
LED colour
Flashing blue
Yellow
Red
For any other problems, contact the technical department.

7 SPARE PARTS

Repair Description
Motor kit
Preheating kit
Electronic card kit
Faults
Faulty heaters
Faulty motor
Fault with one or more air quality sensors
Faulty control unit sensor
Faulty probe
Loss of communication with VMI®
Multiple faults detected
Information
The control unit batteries are flat.
The filter is clogged.
The machine has detected a fault.
Ref. No.
VAS EL 144
VAS EL 143
VAS EL 225
Remedy
Change the batteries.
Change the filter.
Check the error code shown on
the control unit.
Contact the technical
department.
28