Maintenance; Replacing The Filter; Replacing The Control Unit Batteries; Retrieving Operating Data Via Bluetooth - VMI URBAN Manual De Instalación Y Mantenimiento

Tabla de contenido

Idiomas disponibles

5 MAINTENANCE

The VMI® URBAN unit may be either equipped with:

Pollens filter

Or Fine particle filter

Or Pollen, fine particle & odour filter - 3 in 1

To ensure optimum air quality and correct functioning of the VMI® unit, the filter must be regularly

changed (Minimum once a year).

Refer to step 11 of the assembly instructions when changing the URBAN VMI® filter

Filter replacement procedure:

1- Cut the power to the VMI® unit.

2- Replace the old filter with a new filter (the filter tab must be facing outwards).

3- Switch the machine on.

4- Connect the VMI® LINK PRO app to the VMI® unit.

5- Select the VMI® unit in question.

6- Open the Maintenance tab.

7- Select Filter replacement.

8- Specify the renewal period.

9- Confirm to complete the operation.

Note: If the app cannot be accessed, you can complete the filter replacement via the control unit. To

do so, see the control unit user manual.

See the user manual.

In order to analyse the product's behaviour, you can download maintenance data via the VMI® LINK

PRO app > Maintenance tab > VMI® LINK PRO HISTORY button. Enter an email address to receive the

downloaded file. Note you must be sufficiently close to the VMI® to carry out this operation.

Operation that cannot be done by the user.

Tabla de Contenido

Tabla de contenido