Country Selection; Channel Set-Up - Strong SRT 5150 Manual Del Usuario

5150 UM-B5 12/22/04
PART 1 • English
Factory Reset: Be careful when using this function, because it will erase all the data and parame-
ters you may have set earlier to your receiver. Once you have made a Factory Reset you will have to
re-install your preferences and re-scan your channels. To reset your receiver to factory default,
apply the following steps:
1. Select "Factory Reset" and press OK.
2. Enter your PIN Code. The receiver will reset itself to the original factory settings.
3. Before using the function "Automatic Scan search" (see 5.1.4.3),
Note: Your PIN code will change back to the factory setting "0000".

5.1.4.2 Country selection

To install your receiver with all terrestrial TV and Radio programmes available in your country, go to
"Country selection".
1. Press the Menu button
2. Using UP/DOWN keys, select "Installation" and press OK.
3. Using UP/DOWN keys, select "Country Selection" and press OK.
4. Using UP/DOWN keys, select your country and press OK to confirm.

5.1.4.3 Channel Set-Up

The channel set-up is for downloading all DVB-T available TV and Radio channels. There are two possibili-
ties for downloading the programmes:
Automatic Scan search: (Please see inside cover 21,22)
1. Press the Menu button
2. Using UP/DOWN keys, select "Installation" and press OK.
3. Using UP/DOWN keys, select "Channel Set-up" and press OK.
4. Using UP/DOWN keys, select "Auto Scan" and press OK.
5. The screen "Auto Detection" appears first. Thereafter the screen "Auto Scan". follows.
Manual Scan search: (Please see inside cover Screen 23)
1. Press the Menu button
2. Using UP/DOWN keys, select "Installation" and press OK.
3. Using UP/DOWN keys, select "Channel Set-up" and press OK.
4. Using UP/DOWN keys, select "Manual Scan" and press OK.
5. Using LEFT/RIGHT keys, select "Channel No", "Frequency" and "Bandwidth" and press OK.
With the menu "Channel Management" (Please see inside cover Screen 24) you can manually delete single
or all channels and scan new ones. Press OK to confirm.
Note: Automatic scanning process can only be successful when having selected the correct country inside
the menu (5.1.4.2)
All manuals and user guides at all-guides.com
5:27 PM Page 15
select "Country selection" (5.1.4.2) first.
(Please see inside cover Screen 19)
(Please see inside cover Screen 20)
Wait until the automatic scan has finished.
15