The Timer Menu; The Installation Menu - Strong SRT 5150 Manual Del Usuario

5150 UM-B5 12/22/04

5.1.3 The Timer Menu

The timer can automatically switch on or off your receiver at any time. This enables you for example to
record programs with your VCR while you are not at home. It also can be used to wake you up at the time
you set it. Please apply the following steps:
1. Press the Menu button. <Please see inside cover Screen 1>
2. Using UP/DOWN keys on your remote, select "Timer Menu" and press OK. <Please see inside
cover Screen 10>
Timer number: You can select up to 8 different events.
Timer State: Set to "Enabled" to use the timer function, or "Disable" to stop the timer
functions of the timer number you selected.
Timer mode: You can select the following functions in the timer mode.
Press OK, now you will see the channel list, select a channel and Press OK
Timer Cycle: You can set the cycle of the action designated in the timer mode (one time,
Every Day or Every Week).
Date: You can set the starting date of the timer action.
Time: You can set the starting time of the timer action.
Ending Time: You can set the ending time of the channel view when the Timer mode is
on Time Interval.
Channel: You can select the channel to be shown when the receiver timer mode Powers ON
3. Press the Red button to save and proceed with another timer event
4. Press the Green button to save and exit the timer menu
5. Press the Yellow button to exit the timer menu WITHOUT saving the settings
Tip: You have to select the channel, starting time, and ending time settings if the Timer mode is "Time
interval". An error message will appear if any of the settings are incorrect.

5.1.4 The Installation Menu

All settings that are related to TV channel search are within this menu. The installation menu contains several
sub menus such as "System Set-up", "Country selection", "Channel Set-up" and "Parental Lock". To access the
different sub menus, apply the following:
12
All manuals and user guides at all-guides.com
5:27 PM Page 12
1. "Power On": The receiver powers on at the designated date and time.
2. "Time interval": The receiver switches on at the designated date and time, displays
the channel and then switches off at the designated date and time (The value set
at the ending time).
3. "Power Off": The receiver powers off at the designated date and time.
(Please see inside cover Screen 1)
PART 1 • English