How To Use The Product; Main Menu - Televes QPSK-PAL CI Manual De Instrucciones

User manual

5. - HOW TO USE THE PRODUCT

5.1.- MAIN MENU

When the programmer connector is inserted
in the "PROG" socket of the QPSK-PAL CI
front pannel the first information displayed is
the programmer version.
PCT firmware
version
------------
V:4.05
Then the unit version and build number are
displayed:
Unit
Firmware
version:
V: 5.02
All manuals and user guides at all-guides.com
a.- Output menu
The first main menu shows the output fre-
quency/channel (depending on the freq.
mode) and the output level.
OUTPUT
Frequency:
471.25 MHz
Level: 00
The output frequency range is 46-862 MHz.
The output level control ranges from 00 to
99.
To change the frequency you must press
the button until is located over the selec-
ted digit. By using
modify the value of the digit . The following
decimal values are permitted for the output
frequency:
=> .00 MHz
=> .25 MHz
=> .50 MHz
=> .75 MHz
39
STEREO QPSK-PAL CI
To modify the output channel and the output
level you must press
situated over the desired parameter, the
value can be modified by pressing
.
To switch between frequency mode and
channel mode see 5.2. EXTENDED MENU.
and
you can
until the cursor is
and
OUTPUT
Channel:21
(471.25 MHz)
Level: 99