Operation; Safety Check General Information Readiness For Use Control Panel; Switching On Preparatory Work; General Information - BlueMax Mini Modular Plus Manual De Instrucciones

Operation

8. Operation
1. Safety check
General information
Readiness for use
Control panel
2. Switching on
Preparatory work
3. Operating
Hold-down clamp
Fitting Hettich hinges
Drilling
Pressing in
4. Malfunctions during operation
Troubleshooting
5. Checks during operations
en
Checks for proper working order
134
1. Safety check
134 CAUTION
This machine must only be operated and serviced by
134
skilled personnel who have been authorised or trained
134
to do so. Always observe the safety precautions and
internal safety rules.
135
136
Before switching the machine on, satisfy yourself that
136
• any installation, set-up and servicing work have been
136
completed in full,
137
• no persons are present in the danger zone, let alone
137
working on it,
138
• all safety guards must be fitted in the prescribed way, and
138
• the compressed-air supply is ready for operation.
139
139

General information

139
Before commencing production:
139
• Make sure the machine is safe and in proper working order
before and after you switch it on.
• Make sure the compressed air supply is ready for operation.
• Make sure the machine has been set up for the relevant
product.
NOTE
Immediately inform your line manager of machine
malfunctions or faults.
Readiness for use
The machine is ready for operation if:
• all of the above-stated activation processes have been
carried out.
• a trial run has been carried out,
• the compressed-air supply is activated, and
• the machine is set up for the relevant product.
Production can now commence.