Converting From Manual Operation To Foot Pedal; Connecting Foot Switch For A Machine With Horizontal Drilling Unit - BlueMax Mini Modular Plus Manual De Instrucciones

Converting from manual operation to foot switch
The conversion set contains the foot switch, including two
connecting hoses. The foot switch must be placed on the
floor where it must not be allowed to slip.
Connecting foot switch for a machine with horizontal
drilling unit
View of machine rear (rear side of console)
1. Detach black pushbutton hose at Y distribution block
through openings in the suction holder
Connect black foot switch hose to Y distribution block
Connect blue foot switch hose
horizontal drilling" selector switch.
Connect blue foot switch hose
"vertical / horizontal drilling" selector switch .
NOTE
Always carry out a function test after completing
this work.
WARNING
The compressed air hoses must not be damaged
or kinked.
.
1
2
at the "vertical /
3
at the
4
1
2
3
4
Fig. 20: Foot switch
en
119 119