Seagate ST3160026A-RK Guia De Inicio Rapido página 7

For both dual-interface and USB-only kits:
3. Use the power switch on the back of the drive to
turn on power to the drive.
4. Turn on the power to your computer.
5. See page 7 for Windows OS information, or page 9
for Macintosh OS information, including installing
drivers, reformatting and partitioning, and
dismounting your drive.
6. See page 12 to install and configure BounceBack
Express software to allow backups.
Note. For dual-interface kits, you must install and configure
BounceBack Express software to enable the pushbutton-backup
feature on your drive.
6
Quick Start Guide
Print Date:2005-May-10 12:38:44 MDT Released; Prod Rel; A; D0000115888 Seagate Confidential
All manuals and user guides at all-guides.com
You don't need to follow this hardware setup
sequence. Hardware setup steps 1 to 4 are a good
way to connect your new drive to your computer,
but you don't always need to follow this sequence.
For example, if you want to attach your drive after your
computer has already booted, you can simply connect
the interface cable, turn on power to the drive, and
your OS automatically detects and mounts the drive.
This is known as hot-plugging.
In a hot-plug situation, it's a good idea to connect all
power and interface cables to your drive, and to place
the drive where you want it to remain, before you turn
it on. This helps ensure that you won't need to move
your drive after it's running.