Volvo 32296522 Manual Del Usuario página 21

2
1
NOTE
Do not damage the painted surfaces.
• Position the attaching brace down against
the roof edge.
• Pull out the attaching brace so that the pins
(1) become free from the edge of the roof.
Loosenthe screw (2) if necessary.
• Slide on the attaching brace so that the
pins fit in the rivet nuts on the door frame.
Adjust the load carrier's foot laterally if
required.
• Press the attaching brace into the car and
loosely tighten its screw (2) so that the
pins (1) do not fall out of the rivet nuts.
All manuals and user guides at all-guides.com
1
• Check that the load carrier's foot (1) is in
contact with the edge of the roof.
• Tighten the load carrier's screw with the
enclosed tool, by tightening alternately
on each side. The correct torque has been
reached when the tool clicks over.
LOAD CARRIER WITHOUT RAILS
1
• Reinstall the covers on the end faces of the
load carriers and turn the lock key (1) 90°
clockwise.
en-GB
17