Leveling Dishwasher - LG LDFN343 Serie El Manual Del Propietario

us_main.book.book Page 17 Thursday, January 21, 2021 10:27 AM
2
Remove the knockout plug
disposal.
WARNING
• If the knockout plug has not been removed, the
dishwasher will not be able to drain properly.
3
Attach the drain hose to the disposal with the
hose clamp provided. Move the hose clamp
into position and tighten it with a flat-blade
screwdriver.
Connecting Waste Tee without Air
Gap
The height of the drain hose end must be at least
12" (305 mm) and within 40" (1016 mm) from the
base of the dishwasher to avoid water being
siphoned from the tub.
1
Remove the knockout plug with a hammer
and screwdriver.
CAUTION
• If the knockout plug has not been removed, the
dishwasher will not be able to drain properly.
2
from the
a
Connecting to Disposal or Waste
Tee with Air Gap
1
2
3

Leveling Dishwasher

Check that the dishwasher is level and adjust the
leveling feet if necessary.
• Failure to level the dishwasher may result in
leakage, problems closing the door, or noise.
INSTALLATION
Attach the drain hose to the waste tee with
the hose clamp provided. Move the clamp into
position and tighten it with a flat-blade
screwdriver.
Remove the knockout plug with a hammer
and screwdriver.
Connect the end of the drain hose
gap with the hose clamp provided. Move
b
the clamp into position and tighten it with a
flat-blade screwdriver.
• This avoids water being siphoned from the
tub.
If it is not connected, attach the rubber hose
connector to the disposal or waste tee with a
hose clamp (not provided).
CAUTION
17
to the air
a