Specification; Worthy Information - Lacor 69033 Instrucciones De Uso Y Mantenimiento

MODEL:
VOLTAGE:
POWER:
POWER LEVELS:
MEASUREMENT:
WEIGHT:
Warranty Information
This manual provides the installation, safety and operating instructions for the Electric slicer. We
recommend all installation, operating and safety instructions appearing in this manual to be read
before installation or operation.
Electric slicer is a product of extensive research and field testing. The materials used were
selected for maximum durability, attractive appearance and optimum performance. Every unit is
thoroughly inspected and tested before shipment.
IMPORTANT!
If the unit changes ownership, be sure this manual accompanies the equipment.
1.- Plug slicer into a properly grounded electrical outlet of the
correct voltage, size, and plug configuration. If the plug and
receptacle do not match, contact a qualified electrician to
determine the proper voltage and size, and install the proper
electrical outlet.
2.- To avoid any injury, turn the power switch off, unplug the unit
from the power source and allow to cool before performing
any maintenance.
3.- For safe and proper operation, the unit must be located at a
reasonable distance from combustible walls and materials.
4.- Allow a minimum of 30 cm clearance along the sides to
endure proper operation and safety.
30

SPECIFICATION

69033
230V / 50Hz
1800W + 1300W = 3100W
8
29x51x9 cm
4,50 Kg

WORTHY INFORMATION

Keep these instructions for future reference.
WARNING
!