Kohler K–11930 Guia De Instalacion página 3

Attachment
Washer
1. Install the Faucet Body
NOTE: Handle valves that are marked "Hot" by the red ring on the
top of the handle must always be installed into the mounting hole
on the left as viewed from the front of the sink.
From the bottom of the faucet body, straighten the copper supply
tubes.
Apply a bead of plumbers putty or other sealant to the underside
of the base or escutcheon according to manufacturer's
instructions.
Slide the tubes through the mounting hole and position the spout.
Hold the spout in position.
From the underside of the sink, slide the attachment washer,
washer and nut up onto the copper supply tubes.
Securely tighten the nut with a wrench. Do not overtighten.
Remove any excess putty or sealant.
Kohler Co.
Nut
Washer
3 105301-2-BB