LAVOR Pro INDEPENDENT 1900 Manual Del Usuario página 21

1. Connect the high pressure hose to the unit's high pressure
outlet (fi g. 5).
2. Connect the high pressure hose to the spray gun. Insert the
spray wand of your choice into the wand extension. Press in
against the spring tension and twist into the locked position
(fi g. 6).
3. Connect garden hose to unit's water inlet (Max 10 bar, max t.
40° C) (fi g. 7).
4.Connect garden hose to the cold water source and turn
water on completely (fi g. 8).
5. Trigger the gun to eliminate trapped air, wait for a steady
fl ow of water to emerge from the spray nozzle (fi g. 9).
CAUTION! In order to assist the fi rst startup, it is
recommended to hold the trigger pressed during the
pulling of the starter handle.
6. Push the fuel cock to ON position (Fig.
10).
fi g. 5
fi g. 7
fi g. 8
fi g. 9
Fuel cock
fi g. 10
EN
fi g. 6
13 mm
ON
21