Automatic Stop System; Suitable Use Of The Machine; Unpacking; Installation And Start-Up - LAVOR Pro NPX 1211 XP Manual Del Usuario

- If an extension lead is used, the plug and
socket must be watertight and the cable
must have the dimensions shown in the
table below.
230-240V
2
3G 2,5 mm
max 20 m
PLEASE NOTE: This water cleaner is equipped
with the A.S.S. (Automatic Stop System), which
stops the machine during the bypass phase. To
start the water cleaner, it is therefore necessary
to set the switch on position "ON"; after that
press the pistol trigger: the Automatic Stop
System will start the machine and will stop it
automatically when the trigger is released. It is
advisable to put on the safety of the pistol trig-
ger whenever the machine is stopped, in order
to avoid unintentional starting.
OFF position.
24
>
400-415V
The performances of the machine are suitable
for a professional use. Structural technologies
2
4G 2,5 mm
have been studied to assure high reliability and
max 30 m
safety levels, and long life. It is absolutely for-
bidden to use the machine in potentially explo-
sive environments or areas.
The working temperature must range between
+ 5° and + 50°C. It is forbidden to carry out any
modification to the structure and to any ele-
ments of the machine.
CORRECT USE OF THE MACHINE
surface and must be horizontal.
lation and gas venting must be assured.
users are urged to hold the gun in the correct
position, with one hand on the grip and the
other on the spray rod.
-
electrical cables or at the machine.
>
-
Take out the upper and the lower hooks, which
fix the cardboard box to the pallet, take the
cardboard box off, put two wheels of the ma-
chine on ground and take the pallet off (see ref.
2).
>
1
ST
When starting up for the first time or after a
long period out of use, connect the intake line
only for a few minutes so that any dirt is vented
from the delivery outlet.
ELECTRICAL CONNECTION (Ref. 3)
Check that the mains voltage is the same as
-
that of your machine, indicated on the techni-
cal data plate. Your electrical system must be
constructed by qualified technicians capable of

SUITABLE USE OF THE MACHINE

UNPACKING

INSTALLATION AND START-UP

START-UP
EN
-