ROBBE AIR TRAINER 140 ARF Manual De Construcción Y De Uso página 3

Dear customer,
Congratulations on your choice of a factory-assembled
model aircraft from the robbe Modellsport range. Many
thanks for placing your trust in us.
The model can be ready for the air when you have completed
just a few simple procedures. Please read right through
these instructions and the separate information sheets
before attempting to assemble and fly the model, as this will
make it much easier to complete the tasks required.
Please study the illustrations and the brief instructions to
obtain a clear understanding of the individual stages of
construction. All parts must be trial-fitted "dry" (without glue)
before you reach for the glue. Assign the individual compon-
ents to the various stages of assembly.
The servos are already installed, connected to the control
surfaces, and fitted with extension leads.
All directions, such as "right-hand", are as seen from the
tail of the model, looking forward.
We constantly strive to update our products to reflect the
latest developments. You can find details of technical
improvements, updates and revised documentation on
the Internet by calling up the appropriate product
description at our website: www.robbe.com.
Specification:
Wingspan:
Overall length:
Total surface area:
dm
2
All-up weight:
Total surface area loading:
Radio control system:
robbe Futaba 2.4 GHz band radio control system with six or
more channels.
We particularly recommend the FF-6 (T6EXP)
R617 2.4 GHz
Essential items not included in the kit
Description
1 3S1P flight battery, 11.1V / 2200 mAh 20C No. 6950
Velcro (hook-and-loop) tape
All manuals and user guides at all-guides.com
Building and Operating Instructions - Air Trainer 140 ARF
Accessories:
Description
Flight battery charger, e.g.:
Power Peak A4 EQ-LCD
®
Charge lead, T-connector
Please refer to the main robbe catalogue for further details of
battery chargers, tools and aids to building
Set contents:
approx. 1400 mm
approx. 1130 mm
approx. 36.75
approx. 1500 g
approx. 41 g/dm
2
Order No. F4069
Order No.
50590002
Notes regarding the radio control system:
Order No. For this model you require a radio control system with at least
four channels.
No. 8560 The receiving system is powered by the speed controller's
No. 8881 integral BEC system.
Servo leads with differing colour codes are used in the model:
Signal: white / orange
Positive wire: red / red
Negative wire: black / brown
Please bear this in mind when connecting or extending the leads.
Before you check the model's working systems, set the con-
trol surfaces to neutral from the transmitter (transmitter sticks
and trims central).
Before flying the model always move the throttle stick to the
"motor stopped" position before switching the transmitter on.
Only then connect the flight battery.
To switch off, first disconnect the flight pack from the speed
controller, and only then switch the transmitter off.
When installing or setting up the receiving system compo-
nents, including the speed controller and motor, be sure to
read and observe the instructions supplied with them.
You should also read right through the instructions and safety
information supplied with the battery pack and charger before
using these items for the first time.
Painting the model, applying the decals:
This model is supplied with decals already applied. No pain-
ting is required.
Replacement parts:
Order No. Description
25810001 Air Trainer 140 fuselage
25810002 Air Trainer 140 wings
25810003 Air Trainer 140 tailplane
25810004 Air Trainer 40 fin
25810005 Air Trainer 140 undercarriage
25810006 Air Trainer 140 cowl
25810007 Air Trainer 140 propeller
25810008 Air Trainer 140 wing joiner
25810009 Air Trainer 140 spinner
25810010 Air Trainer 140 BL motor
25810011 Air Trainer 140 BL speed controller
No. 2581
3