Hilti SF BT 22­A Manual De Instrucciones Original página 15

Torque
Keyless chuck clamping range
5 Operation
5.1 Inserting the battery
CAUTION
Risk of injury. The drill may start inadvertently.
▶ Before fitting the battery, check that the drill is switched off and that the
switch-on interlock is activated.
CAUTION
Electrical hazard. Dirty contacts may cause a short circuit.
▶ Before inserting the battery, check to ensure that the battery terminals
and the contacts on the drill are free from foreign objects.
CAUTION
Risk of injury. If the battery is not fitted correctly it may drop out and fall.
▶ Check that the battery is securely seated in the drill so that it cannot
drop out and fall, thereby presenting a hazard to other persons.
▶ Push the battery into the drill from the rear until it is heard to engage with
a click.
5.2 Removing the battery
▶ Remove the battery.
5.3 Fitting the belt hook (optional)
WARNING
Risk of injury! Hazard presented by a falling power tool.
▶ A falling power tool may present a risk of injury to yourself and others.
Check that the belt hook is fitted securely before beginning work.
The belt hook allows the drill to be attached to a belt worn by the
operator. The belt hook can be fitted to allow attachment on the left or
right side of the body.
▶ Fit the belt hook on the appropriate side of the drill.
*2160456*
3
4
5
2160456
≤ 7 ftlb
f
(≤ 9 Nm)
3/64 in ... 25/64 in
English 9