Pushchair/Sibling seat
The pushchair/sibling seat can be attached rear or forward
facing.
1
- Align the sides of the pushchair/sibling seat with the
seat mounts. Place the pushchair/sibling seat directly
down until it clicks into place. A "click" sound means the
pushchair/sibling seat is assembled completely. (15)
2
- To remove the pushchair/sibling seat, squeeze the seat
release buttons (16)-1 and lift the pushchair/sibling seat up
(16)-2.
Check Set Up
Pushchair frame is latched open
Rear fenders securely attached
Rear wheels securely attached
Front wheels securely attached
Pushchair/sibling seat securely attached
Canopy mount attached to pushchair frame and canopy
zipped to seat pad
12
DEMI grow pushchair instructions
Product Use
Securing Your Child
1
- Push the center button on the buckle to release the buckle
latch, remove the clips and place your child in the pushchair.
(17)
2
- Connect the shoulder buckle and hip buckle. (18)
3
- Secure the shoulder buckle and hip buckle to the buckle
latch and repeat on the opposite side. (19)
4
- Fit the harness snugly to your child by sliding the lower
adjustment buckles (located under the harness covers)up
(20)-1. Then pull the waist adjustment straps out. (20)-2
Shoulder Harness Position
1
- The upper shoulder harness buckles can be moved up and
down for added adjustment. (21)
To avoid serious injury from falling or sliding out, always
secure your child with the harness.
Make sure the harness is adjusted properly and your child
is snugly secured. The space between the child and the
shoulder harness should be about the thickness of one
finger.
DO NOT cross the shoulder belts. This will cause pressure
on your child's neck.
Shoulder Harness Pad Removal
To remove the shoulder harness pads, release the buckle.
1
- Slide the shoulder harness pad down off the shoulder
buckle harness strap. (22)
To reattach the shoulder harness pad, undo the snaps and
insert the shoulder harness buckle through the inside loop.
DEMI grow pushchair instructions
13